| Features and Benefits |
- Individual clips can be randomly placed;
- Clips don’t float during reflow;
- Available in two gap widths: the 0.165” gap is for use with a standard 5mm fuse or the 0.090” gap is for use as a 1/8th inch (.125”) pin receptacle;
- Gap dimension / contact force can be optimized for your specific application depending on mating cycles, voltage current and operating environment;
- High pressure, gas tight connection;
- Designed for automation using the customer’s existing pick and place equipment and a special feeder, no time consuming hand placement or costly fixturing required, or they can be automated using standard tape feeders.
|
|
|
 |
|
|
5mm Fuse Clip |
Connector |
| Loose Part No. |
1230 |
| Taped Part No. |
1230T |
| Dim 'A' |
0.165" (4.19mm) |
| Material Thickness / Type |
0.016" (0.41mm) C51000 Phosphor Bronze |
| Standard Finish |
100% Matte Tin over Copper (0) |
| Current Rating |
15 Amperes |
| Feeder System |
Standard 16mm Tape Feeder |
|
U.S. Patent Nos. 5,695,348, 5,730,608 and other U.S. and international patents |
|
Zierick recommends .006" (0.15mm) stencil thickness for most applications. For other stencil thicknesses, call Zierick's product development department. |
|
|
Surface Mount
